Fiche détaillée
| Id | 267 |
| Auteur | Walt-Montenegro Christian |
| Titre | Caractérisation des cratères du lac Léman et linéations associées à l'aide des outils SIG |
| Sous-titre | |
| Résumé | En 2014, une collaboration entre l’Université de Genève, l’université de Berne et l’Institut Forel a permis d’obtenir un modèle numérique bathymétrique de haute résolution planimétrique de 2 mètres et altimétrique de 20 centimètres au-delà de 5 mètres de profondeur. Ces données révèlent l’existence de centaines de structures morphologiques précédemment inconnues, dont des dépressions ressemblant à des cratères et des linéations. Le but de ce travail est donc d’élaborer un inventaire et une analyse morphologique de ces cratères et linéations et de décrire les caractéristiques spatiales de ces structures sédimentaires particulières grâce à l’utilisation des outils SIG. Les principaux résultats obtenus identifient 656 cratères, dont la circonférence va de 24 m à 824 m. Le plus profond se situe à 237 m et le moins profond à 24 m. La hauteur de ces cratères varie entre 1 m à 8.2 m. D’autre part, 95 linéations ont été cartographiées, dont la longueur varie de 0,39 km à 4,4km. La distribution spatiale des cratères semble être associée aux réseaux de fractures, qui permettent l’échappement de fluides (eau, gaz) en surface, ce qui expliquerait leur formation. En ce qui concerne les linéations, leur orientation moyenne de 109° semble indiquer une direction comparable à celle des chenaux glaciaires, qui eux sont liés au déplacement du glacier du Rhône. La « visibilité » des cratères et des linéations à la surface du fond du lac semble, quant à elle, être liée aux zones du Grand-Lac présentant des taux de sédimentation les plus faibles, ce qui a permis de préserver les reliefs anciens sous-jacents (Walt, 2021). Cette étude de données bathymétriques apporte de nouvelles connaissances sur la répartition, formation et structures des cratères et des linéations du Léman. Il serait cependant intéressant d’envisager une étude similaire avec des automatisations de sélection de cratères et de linéations de manière à éviter la part d’incertitude liée aux choix humains sur la sélection des structures à étudier. |
| Summary | In 2014, a collaboration between the University of Geneva, the University of Bern, and the Forel Institute yielded a digital bathymetric model with a high planimetric resolution of 2 meters and an altimetric resolution of 20 centimeters beyond 5 meters depth. This data has revealed the existence of hundreds of previously unknown morphological structures, containing depressions that have similarities of those observed in craters and lineations. The purpose of this work is to establish an inventory and morphological analysis of craters and lineations and to describe the spatial characteristics of the sedimentary structures using Geographic Information System techniques. The main results obtained allowed for 656 craters to be identified, whose circumference range from 24 to 824 m. The deepest is located at 237 m, while the shallowest is located at 24 m. The height of these craters ranges from 1 to 8.2 m. On the other hand, 95 lineations were mapped, with length varying from 0.39 km to 4,4 km. The spatial distribution of these craters seems to be associated with the network of fractures, which allow for fluids (water, gas) to escape to the surface, which would explain their formation. As for the lineations, their average orientation of 109° seems to indicate a direction similar to that of the glacial channels, which are linked to the displacement of the Rhône Glacier. The visibility of craters and lineations of the lakebed, on the other hand, appears to be related to the zones of the “Grand-Lac”, with the lowest sedimentation levels, which preserved the underlying ancient landforms (Walt, 2021). This bathymetric data study provides new insights into the distribution, formation and structure of the craters and lineations in the Leman Lake. However, it would be interesting to consider a similar study with an automated crater and lineation sampling method, in order to avoid the uncertainty associated with human choices on the selection of structures to be studied. |
| Volee | 2020 |
| Soutenance | 2022-01-24 |
| Sujet | cratères, linéations, carte bathymétrique, morphologie, Léman, SIG, ArcGis Pro |
| Diffusion interdite |